All metal mounts, 18/8 stainless steel wire mesh resilient cushion fixed under the foot. Locating foot in cast iron, paint protection. Suffix “H” with house and levelling screw.

Characteristics
Mounting with a natural frequency of 15-20 Hz within a wide load range. Progressive spring-rate. Designed to absorb high static and dynamic forces for machines without base fitting. For compression loads only. Maximum excitation amplitude: ± 0,3 mm. Dynamic overloading: 5 g. Magnification factor (Q): < 4. Temperature range: -90°C to +300°C.

Applications
Vibration isolation of very disturbing machine tools or where a high degree of isolation is required: All types of presses, guillotines, bending-and rolling machines. Suspension of rotating machines operating at over 2500 rpm. Stabilisation of exhaust pipes.

Installation
-Raise the machine
-Place the mounts under the machine and fasten the bolts
-Lower the machine until it rests on the mounts
-Level the machine and lock the nuts.

For less disturbing machine tools or where a very stable suspension is necessary, use machine mountings V43 - V46 or V43H - V46H.